1. The hot air inhaled by the blower is dispersed on the upper end of the heating cylinder, flows uniformly in the heating cylinder and conducts effective geothermal exchange with the heating tube. Then the hot air collects at the lower end of the heating cylinder, and enters the cylinder from the lower part through the screen separator.
2. The hot air uniformly diffuses upward, so that the mold particle raw materials in the barrel are continuously dried from the bottom to the top; After a certain period of drying, the raw materials below the drum can be evenly and fully dried, while the new materials above the drum can be continuously supplied, so as to make the raw materials automatically dry
。
]]>1. Dehumidifying dryer is a special equipment for the plastic industry that can continuously deliver dry air. It is mainly inhaled moist wind through the molecular sieve drying effect and the output of dry wind.
2. And the characteristics of the molecular sieve is low moisture, high temperature platoon is wet, that is, inhalation of damp wind cooling processing first, and then water is molecular sieve (state) in low temperature adsorption, and molecular sieve inhalation moisture, we again for high temperature processing, make its water to the atmosphere, and constantly work cycles.
]]>1. Set dehumidification drying and feeding in one. Not only can dehumidify and dry all kinds of plastic raw materials, but also can feed to injection molding machine and other molding host, to the greatest extent to solve the problem caused by plastic particles water absorption or water deposition.
2. Drying mode of circulating wind. According to the quality of raw materials, different varieties or the requirements of products, the SHY type dry blaster can choose to adjust the cycle switching time of dehumidifying molecular sieve tube, regenerative heating temperature and drying temperature of materials.
3. The cyclic wind mode operates in a closed air loop. After the particles are dried together, the air returns directly to the fan. オ only when feeding insufficient wind, outside air is inhaled to supplement the air volume, the maximum energy saving.
4.SHY type combined machine is operated by a control device with keys and LED display. The cycle switching time and regenerative heating temperature of dehumidifying zeolite can be adjusted. Separate configuration heating drying, feeding and other single control functions for easy operation.
]]>1. Dehumidification drying feeder is a combination of dehumidification, drying and two-stage feeding, especially suitable for engineering plastic materials with strong hygroscopic properties.
(2) in plastic processing industry, the products are shrinking, silver lines and bubbles, cracks, flow mark, the phenomenon such as poor transparency, is the main cause of the bad quality plastic caused by not fully dry before molding, engineering plastics such as PA, PET, PC, PBT, CA hygroscopicity strong materials, due to the internal water seep into the plastic particles, the traditional hot air drying machine is unable to make it completely dry.
3. The three-machine dehumidification and drying machine is in a closed circulation system to fully dehumidify the air heating, dry air will quickly plastic particles of water completely precipitation to achieve the effect of dehumidification and drying.
]]>1. The automatic feeding machine is also called the automatic feeding machine, suction machine, or feeder is an indispensable ー of main auxiliary plastic processing. Feeding machine can be exempted from manual feeding of a lot of hemp, so that the feeding work become more safe, more labor-saving, is to promote the modernization of the plastic processing industry essential machine.
2. The feeding machine is mainly composed of the body, the material storage barrel and the pipe fittings. The body consists of the control box, the air pump and the filter.
]]>1. The automatic feeding machine is also called the automatic feeding machine, suction machine, or feeder is an indispensable ー of main auxiliary plastic processing. Feeding machine can be exempted from manual feeding of a lot of hemp, so that the feeding work become more safe, more labor-saving, is to promote the modernization of the plastic processing industry essential machine.
2. The feeding machine is mainly composed of the body, the material storage barrel and the pipe fittings. The body consists of the control box, the air pump and the filter.
]]>1. The automatic feeding machine is also called the automatic feeding machine, suction machine, or feeder is an indispensable ー of main auxiliary plastic processing. Feeding machine can be exempted from manual feeding of a lot of hemp, so that the feeding work become more safe, more labor-saving, is to promote the modernization of the plastic processing industry essential machine.
2. The feeding machine is mainly composed of the body, the material storage barrel and the pipe fittings. The body consists of the control box, the air pump and the filter.
]]>1. The automatic feeding machine is also called the automatic feeding machine, suction machine, or feeder is an indispensable ー of main auxiliary plastic processing. Feeding machine can be exempted from manual feeding of a lot of hemp, so that the feeding work become more safe, more labor-saving, is to promote the modernization of the plastic processing industry essential machine.
2. The feeding machine is mainly composed of the body, the material storage barrel and the pipe fittings. The body consists of the control box, the air pump and the filter.
]]>1. The rotating shaft of the trump medium speed crusher is equipped with superior tool holder design, which is coordinated with the careful structural design of the moving knife to ensure that the cutting Angle and the spacing of the fixed knife remain the same after the grinding and reinstallation of the moving knife, which saves the complicated process of adjusting the tool clearance and does not need to spend the time to stop working; The favored knife is designed for the favored four-edged blade, which can be used repeatedly for four times for favorable long-term running.
The front plate of the crusher separates the bearing seat and the sieve seat. The sieve seat is fixed with strong clamps. The sieve seat can be removed easily and quickly to facilitate material cleaning, maintenance and maintenance.
3. The axis diameter of the rotating shaft of the trump medium speed crusher is designed according to the maximum rotation width, and both sides are supported by the bearing to make the crushing object more stable and smooth; The stepped knife rest design enhances the cutting torque, can carry on the cutting effectively continuously, can adapt all kinds of material plastics to break and recycle more.
]]>1. Plastic crusher, also called plastic crusher, is mainly used to crush all kinds of plastic and rubber, such as plastic profile, pipe, rod, silk thread, film, waste rubber products.
2. The granule can be directly used by extruder or injection molding machine, or can be used for regeneration through basic granulation. It can also be used as peripheral equipment of injection molding machine to directly crush and recycle defective products and nozzle materials produced by injection molding machine
。
]]>